系統級封裝 | ASE

The drive towards semiconductor miniaturization and integration is rapidly unleashing the power and potential of System-in-Package (SiP), a package or module containing a functional electronic system or sub-system that is integrated and miniaturized through IC assembly technologies. ASE is the leader in System-in-Package (SiP) technologies from design to assembly and high-volume manufacturing while serving a broad spectrum of applications and markets. With attributes that deliver higher performance, cost-effectiveness, and shorter time to market, SiP technology is enabling functionality and creating opportunity across limitless electronics applications.

What is System-in-Package (SiP)?

ASE defines SiP as a package or module that contains a functional electronic system or subsystem that is integrated and miniaturized through IC assembly technologies. Rather than generic IC packaging technologies, development of SiP requires heterogeneous integration of single or multiple chips (such as a specialized processor, DRAM, flash memory), surface mount device (SMD) resistor/capacitor/inductor, filters, connectors, MEMS device, sensors, other active/passive components and pre-assembled package or subsystem.

Enabling Technologies

ASE’s SiP solutions leverage upon established IC assembly capabilities including copper wiring, flip chip packaging, wafer level packaging, fan-out wafer level packaging, 2.5D/3D IC and embedded chip packaging to address ongoing trends in mobile, IoT (Internet of Things), high-performance computing, automotive, and artificial intelligence.

Shielding

Conformal Shielding
Compartment Shielding
Selective Shielding
Magnetic shielding

Interconnection

Cap Wire Bond
Wire Bond
Flip Chip

Die / Package Stacking

Antenna

Double Side Molding

Double Side Molding
Selective Molding
Flexible Encapsulation
Molded Underfill
Irregular Packaging

Wafer Level Package

Embedded Substrate

SESUB
a-EASI

Board Assembly

High Density SMT
ACF Bonding
Wire Bond on Flex
Laser Welding
Flex Bending

Shielding

Conformal Shielding
Compartment Shielding
Selective Shielding
Magnetic shielding

Antenna

Double Side Molding

Double Side Molding
Selective Molding
Flexible Encapsulation
Molded Underfill
Irregular Packaging

Board Assembly

High Density SMT
ACF Bonding
Wire Bond on Flex
Laser Welding
Flex Bending

Interconnection

Cap Wire Bond
Wire Bond
Flip Chip

Die / Package Stacking

Wafer Level Package

Embedded Substrate

SESUB SESUB
a-EASI a-EASI

Conformal Shielding

ASE had introduced a novel conformal shielding technology (CFS) for electromagnetic interference (EMI) prevention, against external interference, keep chip normal working. For thinner, smaller and lighter product, PVD CFS technology was designed to substitute for metal can/lid. The technology was widely applied in wireless communication, ex: RF, Bluetooth, WiFi, etc.

Applications

Phone/Tablet
Wearable Device
Glasses
Camera
Car System

Features

CPS technology was prevented package to package and outer signal interference. Developed advanced PVD process replaced metal can/lid to reach product miniaturization, area reduction 17% and thickness reduction 7%.

Capabilities

ASE developed PVD CFS technology was reached over 99.9% (SE value > 30dB) EMI impact in 0.5 to 6GHz frequency when metal layer thickness over 3um.

Compartment Shielding

ASE had introduced a new, EMI compartment shielding (CPS) structure which was constructed from laser trench and conductive paste. The technology is designed to provide better shielding performance in more compact structure. The distinctive characteristics of CPS technology (Laser trench/Conductive paste filling) are flexible and customized design for high-integration module. This offers customers much more aggressive layout design, and also high-level EMI shielding performance for sensitive components/chipset. In addition, CPS technology enables the smaller form factor of modules which is needs of wearable device, mobile device, and IoT application.

Applications

Phone/Tablet
Wearable Device
Glasses
Camera
Car System

Features

Higher EMI shielding performance
Highly flexible and customized shielding pattern design
Thinner, compact shielding barrier (~150um)
Mold base compartment shielding solution

Capabilities

Structure:

Trench opening width (top/bottom): 400um/80um
Shielding performance (S.E.): 45~50dB (1GHz – 6GHz)

Antenna on Package

Antenna on Package (AoP) is a new approach to minimize the antenna size at the package level, which not only can provide the smallest antenna, but also a highly integrated RF SiP module to reduce the difficulty at the system level.

Applications

AoP technology allows much more applications in mobile device and wireless communication, such as 2.4GHz BLE in BT4.2 and future BT5.0, WiHD in IEEE 802.15.3c, WiGig in IEEE 802.11ad. In addition, AoP technology enables the advanced 3D patterning on package that addresses the need in the challenging 77GHz for car radar and 94GHz for imaging.

Phone/Tablet
Wearable Device
Glasses
Camera
Car System

Features

AoP technology is designed to provide a good radiation performance with the low insertion loss and good impedance matching between the RF SiP and the antenna. Base on a completed material and process database system in ASE, the electromagnetic simulation can be performed for different customer requested conditions. The key to realize the optimum design into a successful AoP product is through the powerful 3D patterning ability on a conformal and good quality metal film.

Capabilities

ASE concentrates on advanced 3D patterning developing with high accuracy control and high automation throughput and these unique capabilities include:

Min. package size: 4.9mm x 3.3mm (achieved at 2.4GHz)
Film step coverage: >30%
Min. line/space on top: 250μm
Dimension tolerance on side wall: within +/-35um

High Density SMT

The ways to reduce form factor of SiP in X/Y size are utilization of tiny passive components and shrinking distance between components to component. ASE HD-SMT technology by using tiny 01005 SMD and 3 mils component to component distance is ready and in mass production.

To expand more functions in restricted body size of a SiP/module, dual side SMT as well as double sides molding technology is adopted.

Applications

Phone/Tablet
Wearable Device
DGlasses, Camera
DIoT/Smart Home Electronics
DCar System

Features

One side or dual side SMT
Ultra-high accuracy pick & place
Ultra-high SPI & AOI for yield insurances

Capabilities

01005 component MP, 008004 ready
6-layer 0.185mm substrate in mass production
Minimum 3 mils component to component distance

Selective Molding

ASE provides an advanced module encapsulation technology, called the selective molded module technology. It can solve the sensitivity components cannot put in over molded issue, but also allows the end product space design has greater flexibility.

Applications

Miniaturization module especially in WiFi and RF.

Features

On the same side of the substrate, there are both an mold area and a open area.

Capabilities

Clearance of open area: > 0.3mm
Clamp width between mold area and open area: > 0.6mm
Clamp width between open area and package side line: > 0.6mm

Module Level

Pre-con (L3)	TCT-1000	HAST-264	HTST-1000
Passed	Passed	Passed	Passed

Board Level

Drop Test	Function
Passed	Passed

Flexible Encapsulation

ASE provides an advanced encapsulation technology, called the flexible encapsulation technology. It enhances the wearable products in the waterproof function: products can still be bent after encapsulation.

Applications

Wearable electrical product including clothes, glasses, watches, bracelets, and rings.

Features

This technology uses a special flexible sealant material with a soft board (FPC) so that the module can be bending in the end product after module assembly.

Capabilities

Test Item	Test Condition	Duration	Results
Pre-con (L3)	TCT-1000	HAST-264	HTST-1000
TCT	-55°C~85°C	100 cycles	Passed
Bending	30°C	100 cycles	Passed
Twist	twist span 45mm, angle 5~30 degrees	100 cycles	Passed

Turnkey Solution

ASE offers customers complete SiP manufacturing capability including system design, software development, module testing and electrical heat transfer simulation technology to enable smaller, higher performance, lower power consumption and more cost-effective end products.

System Co-Design

SiP Electronic Design Automation (EDA) solution
RF Circuit design
Antenna Design
Shielding Solution
Substrate Layout design

Packaging Consultancy

Package selection & configuration
Design rule guideline
Process capability
Reliability verification

System Test Consultancy

RF Wafer probing
RF ATE Platform
EVB design & fabrication
Testing tooling design
Final test solution development

System-in-Package Intelligent Design (SiP-id)

SiP-id stands for System-in-Package – Intelligent Design. The solution consists of an enhanced reference flow that includes IC packaging and verification tools from Cadence, and a new methodology that aggregates the requirements of wafer-, package- and system-level design into a unified and automated flow. By deploying the SiP-id methodology, chip designers can reduce design iterations and greatly improve throughput as compared to existing advanced packaging EDA tools. The end result is a vast reduction in the time needed to design and verify ultra-complex SiP packages.

It is our intention to offer all ASE customers a set of efficient tools where designers can freely experiment with designs which can go beyond the current packaging limits. This set of design tools are available to eligible customers immediately. However, some of the proprietary libraries and design rules will be subject to an agreement with ASE. It is our belief that IoT, AI, VR, AR, EV and all future applications will demand more SiPs and modules. This is an ongoing effort by ASE, not only to develop fanout (such as Fan-Out Chip on Substrate, FOCoS), panel fanout, embedded substrates, 2.5D, but also to making design tools more user-friendly, up-to-date and efficient.

What is required to start a package design with SiP-id, DRC deck is required for fan-out design and 3D DRC deck, for SiP design. The customer can engage our in-house engineering to begin the process.

SiP Applications

SiP solutions are highly adopted by end customers for applications including wireless communication, computer storage, power and sensor. In addition, ASE SiP solutions enable a wide range of smart applications including smart living, smart bike, smart city, smart automotive and smart hearables. Advanced SMT, encapsulation, shielding as well as interconnection assembly technologies are developed to meet future requirements arising from 5G communication, AR/VR sensing, and health caring applications.

BT/BLE+MCU SiP Module

Applications

Remote Control
Health, Fitness and Medical Devices
Home Automation, Energy

Features

2.4 GHz BLE transceiver
ARM®sup> Cortex – M0 32 bit processor
256 kb embedded flash program memory
16 kb RAM
Dimension: 6.5x6.5x1.2mm
Package: AoP, LGA

WLAN+MCU SiP Module

Applications

IoT
Smart Home
Security
Energy Harvesting

Features

Dimension: LGA 11x11mm²
Structure: FC+W/B
WiFi 11b/g + 32bit MCU (50MHz)
128kb flash + 512kb EEPROM
Dimension: 6.5x6.5x1.2mm
Protection: molding, conformal shielding

LoRa/SigFox/NB-IoT SiP Module

Applications

Wireless Alarm and Security Systems
Internet of Things (IoT)
Smart City

Features

SX1276 transceiver
Intel 32MHz Quark MCU
DSP for sensor subsystem
Worldwide LoRa ISM band embedded
384 kb of on-die NVM+8 kb OTP on-die NVM
80kb of on-die SRAM
Dimension: 12x12x1.3mm
Package: Conformal shielding, WLCSP

SSD SiP Module

Applications

Notebook
Tablet

Features

Dimension: 22x42x1.8mm
Structure: Double sided structure in single sided NGFF card thickness
Protection: Molding
Capacity: NAND flash, 120GB/240 GB

Sensor SiP Module

Applications

Physiological Signal Sensing

Features

Structure: Optical molding + EDS
LED x 3pcs + photo-die x 1pcs W/B
256 kb embedded flash program memory
EDF: 2L embedded-die substrate
Dimension: LGA 5.5x4.2mm²
Protection: Molding with clean CPD

Optical SiP Module

Applications

Heart Rate Monitoring & Heart Rate Variability, SpO2, Skin Temperature, Blood Pressure
Handset, Wearables & Fitness

Features

Integrated ARM-Cortex M4 MCU
Integrated 24bits AFE (Analog front-end) for optical sensing
Optical photo sensor with Red & IR & Green LED
Embedded motion cancellation algorithm &skin variation
Embedded die substrate: SESUB
Micro LENs molding, double molding
Lid open-cavity capping

Environment Sensor SiP Module

Applications

Handset, Wearables, IoT
Smart Home & Building
Automotive, Industry

Features

All-in-one SiP: Bluetooth v4.2 (BLE), ARM Cortex – M0 MCU
Temperature/Humidity/Pressure sensing
Package: open cavity WL SiP, TSV

Ambient Light/UV Sensor SiP Module

Applications

Environment
Smart Home & Building

Features

All-in-one SiP: Bluetooth v4.2 (BLE), ARM Cortex – M0 MCU
High resolution ADC for lighting channel (green/white/UV/IR)
Excellent UV sensibility
UV/ALS software for UV level & lighting control
Package: FOCSP, Micro LENs molding

Motion Sensor SiP Module

Applications

Wearables, Fitness
Smart Home & Building
Industry

Features

All-in-one SiP: Bluetooth v4.2 (BLE), ARM Cortex – M0 MCU
3-axis acceleration sensor (range: 16G)
Embedded motion software for security detection

Gas Sensor SiP Module

Applications

IAQ Monitoring for Smartphones, Accessories and Connected Home Devices
Alcohol Breathalyzer in Consumer Devices
Smart City

Features

Air quality sensor
CO2 (eCO2): from 400ppm to 5000ppm
TVOC (the total volatile organic compound): from 0ppb to 1000ppb
Dimension: 4x2.7x1.1mm
Temperature/Humidity/Pressure sensing
Package: Open cavity WL SiP, TSV